Remove the mechanism of the panorama glass roof
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Unclip sealing lip (1) and push slightly to a side.
- Unclip and feed out the limit position of mechanics (2)
with the special tool 0 490 527 (00 9 310)
and a slight hit inwards.
- Guide out the stopper of the mechanics (1)
from the slide/tilt sunroof frame (2)
.
- Slide the mechanics (1)
onto the slider (2)
towards rear from the slide/tilt sunroof frame (3)
in the arrow direction.
- Slide the mechanics (1) to the rear and out of the slide/tilt sunroof frame.
- Feed the mechanics (1) out of the slide/tilt sunroof frame and detach the driver (2) .