Supplying The New Parts Required

Precondition 

• Vehicle is secured on the straightening bench.
  NOTE: TECHNICAL INFORMATION 

  • Observe the procedure for repair stage 3.

    For additional information see: 41 00... Repair method for repair stage 3

  • For information about stripping and rebuilding operations, refer to the surrounding text in the AIR. See the FRU number.

Preliminary work 

Follow-up work 

• Procure the following new parts (see Electronic Parts Catalog):

  Center engine mount (1) 

  Reinforcement of engine mount, inner (2) 

  Holder of dynamic stability control (DSC) (3) 

  Holder of radio data system (RDS) (4) 

  NOTE: TECHNICAL INFORMATION 
  For additional information see: 41 00... Overview of consumables in Electronic Parts Catalog

  Courtesy of BMW OF NORTH AMERICA, INC.

• Supply the following consumables:

  Material	Quantity
  Adhesive K1	1
  Blind rivet N1	25
  Blind rivet N2	20
  Earth pin	5
  Coarse thread bolt	5
  EMC screw	3
  Cleaning agent R1	1
  Cleaning agent R2	1
  Sealing compound D1
  Cavity protection wax remover