Installing the cover for cross member at the top

• Check clips (1) for damage.

  Defective or missing clips (1) must be replaced.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Mount the cover and clip into the clips.
• Mount the expanding rivets (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE UPPER TRIM PANEL ON ROLLOVER PROTECTION SYSTEM .
• Refer to INSTALLING THE REAR LEFT AND RIGHT HEAD RESTRAINT GUIDES .
• Refer to INSTALLING REAR LEFT AND RIGHT HEAD RESTRAINTS .
• Refer to INSTALLING THE REAR SEAT .