33 52 Shock Absorbers
33 52 TIGHTENING TORQUE OVERVIEW
| Nut and locknut/self-locking nut | ||
| M8x40 Replace screw. |
Tightening torque | 28 Nm |
| Rear shock absorber to the camber control arm | ||
| M12 Replace screw and nut. Tighten in the normal position. Tightening via nut. |
Tightening torque | 100 Nm |
| Angle of rotation | 90° | |
| Support bearing on shock absorber | ||
| M14 Replace nut. |
Tightening torque | 38 Nm |