Secure the wiring harness for the EPS on the front subframe
NOTE:
RISK OF DAMAGE
Improper routing of cables and wiring harnesses.
Trapped, crushed or damaged cables may cause short circuits and malfunctions.
Improper routing of cables and wiring harnesses.
Trapped, crushed or damaged cables may cause short circuits and malfunctions.
- Route all cables without abrasions, do not trap and crush.
- Guide in and position cable (2) .
- Secure clamps (1)
.
- Variant with rear wheel drive:
Guide in and position cable (4) .
Secure clamps (3) .
Connect connectors (1) and (2) lock.
- Variant with all-wheel drive:
Guide in and position cable (4) .
Secure clamps (3) .
Connect connectors (1) and (2) lock.
The connectors (1) and (2) engage audibly.
- Secure clamps (1) .