Secure the juncture shaft in front on the front axle differential
- Clean all 4 threads (1)
in the front axle differential flange before
assembling the prop shaft.
Remove possible residues and contamination.
- Replace screws.
Parts: Screws
- Apply screw locking agent to all screw threads (1)
before screwing.CONSUMABLE SPECIFICATION
High-strength screw lock, Loctite 270 10 ml, Tube 83 19 2 210 337 NOTE: TECHNICAL INFORMATION
After the screw connection of the front prop shaft, a 30 minute hardening time must be ensured before the vehicle is operated again. - Release special tool 2 413 317 .
- Position the propeller shaft in front on the front axle differential.
- Replace screws.
Parts: Screws
- Tighten screws (arrows).
TIGHTENING TORQUE SPECIFICATIONS
| Prop shaft before the front axle differential | ||
| Replace screws. Joining torque and angle of rotation must be observed without fail. |
Tightening torque | 25 Nm |
| Angle of rotation | 45° | |