Removing the catalytic converters for the cylinders 1 to 6 (engine removed)
CAUTION:
Heavy component.
Heavy components can lead to injury or damage.
Heavy components can lead to injury or damage.
- Remove and install heavy components with the aid of another person/other persons.
- Before removal, pay attention to the installation position
of the catalytic converter (2) and the V-ribbon clip (3) on the exhaust turbocharger (1).
If necessary, mark the catalytic converter (2) with the commercially available tools.
- If installed
- Loosen screws (1).
- Release the screw (2).
- Release nut (3).
- Guide out and remove holder (4).
- If installed
- Feed out the adapter (1) and remove it.
- Release the V-ribbon clips (1).
- Feed out and remove the catalytic converter (2) for the cylinders 1 to 3.
- Feed out and remove the catalytic converter (3) for the cylinders 4 to 6.