Detaching the wiring harness of the EPS from the front subframe
- Variant with rear wheel drive:
Unlock and disconnect the plug connections (1) and (2) .
Release clamps (3) .
Remove the cable (4) and put to one side.
- Variant with all-wheel drive:
- Unlock and disconnect the plug connections (1) and (2) .
- Release clamps (3) .
- Remove the cable (4)
and put to one side.
- Release the clamps (1)
.
- Loosen clamp (1) .
- Guide out cable (2) and set it aside.