Attaching the refrigerant lines to the air conditioning compressor
Precondition
All the negative battery cables are disconnected.
- Replace sealing rings (1)
on refrigerant lines (2)
.
Parts: Sealing ring
- Insert and install the coolant lines (2) .
- Tighten the screws (1) .
TIGHTENING TORQUE SPECIFICATIONS
| Refrigerant line on air conditioning compressor | ||
| M8 | tightening torque | 19 Nm |
CAUTION:
Improper routing of the positive battery cable.
Risk of short circuits!
Risk of short circuits!
- Route the positive battery cable without abrasions and do not trap.
- Insert the positive battery cable (2) and install it.
- Tighten nut (1) .
TIGHTENING TORQUE SPECIFICATIONS
| Positive battery cable to the alternator | ||
| M8 | Tightening torque | 19 Nm |
- Connect connectors (3)
and lock.
The connector (3) must engage audibly.