Install the intermediate pipe

NOTE: TECHNICAL INFORMATION
Mount the exhaust system in a de-energized state, following the tightening sequence from the rear silencer towards the exhaust manifold.

Replace the seals (1).

Parts: Seals

Courtesy of BMW OF NORTH AMERICA, INC.

Feed in the intermediate pipe (1) and install it.
Tighten the nuts (arrows).

TIGHTENING TORQUE SPECIFICATIONS

Exhaust system to intermediate pipe on catalytic converter
Nuts M8	Tightening torque Tightening torque	5 Nm 24 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Version A:

Replace the screw (1).

Parts: Screw

Tighten down screw (1).

TIGHTENING TORQUE SPECIFICATIONS

Exhaust system on the transmission crossmember
M8x25 Replace screw.	Tightening Torque	19 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Replace the screw (1).
Parts: Screw
Tighten down screw (1).

TIGHTENING TORQUE SPECIFICATIONS

Exhaust system on the transmission cross member
M8x25 Replace screw.	Tightening Torque	19 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Version B:

Replace the screw (1).

Parts: Screw

Tighten down screw (1).

TIGHTENING TORQUE SPECIFICATIONS

Exhaust system on the transmission cross member
M8x25 Replace screw.	Tightening Torque	19 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten nut (1).

TIGHTENING TORQUE SPECIFICATIONS

Exhaust system to holder
Nut M8	Tightening torque	19 Nm

Courtesy of BMW OF NORTH AMERICA, INC.