Installing front brake pads
- Insert and position the brake pads in the brake caliper.
- Mount the brake caliper (1) in the arrow direction.
- Replace nuts (1).
Parts: Nuts
- Put on the nuts (1) and tighten.
TIGHTENING TORQUE SPECIFICATIONS
| Brake caliper on stud bolt of the front swivel bearing | ||
| M12 Replace nuts. | Tightening torque | 95 Nm |
- Push the locking pins (1) in the arrow direction up to the stop.
If necessary, press the brake pads against the spring force of the retaining spring.