Installing the rear brake pad wear sensor

• Install the brake pad wear sensor (2) in the direction of arrow in the brake pad and ensure its correct fit.

Courtesy of BMW OF NORTH AMERICA, INC.

• Hook the cable of the brake pad wear sensor in the holder.

  If the FLE have also become moist, the FLE must also be replaced!

Courtesy of BMW OF NORTH AMERICA, INC.

• Attach cable of brake pad wear sensor in holders (1).
• Connect and lock the connector and seal the cover (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to MOUNTING THE REAR RIGHT WHEEL .