Connect diagnostic system/Brake bleeding procedure service function
NOTE:
TECHNICAL INFORMATION
Before first working on the DSCi brake (integrated brake), the "DSCi" web-based training must be passed successfully.
The "DSCi" web-based training is started in the Learning Management System (TMSi).
Before first working on the DSCi brake (integrated brake), the "DSCi" web-based training must be passed successfully.
The "DSCi" web-based training is started in the Learning Management System (TMSi).
NOTE:
TECHNICAL INFORMATION
Use only BMW-approved brake fluids.
For additional information see: the "Fluid Capacities" tab for the selected vehicle.
Use only BMW-approved brake fluids.
For additional information see: the "Fluid Capacities" tab for the selected vehicle.
Preliminary work
- Refer to REMOVING THE COVER OF THE ENGINE COMPARTMENT AT THE REAR LEFT .
- Refer to CONNECTING THE BLEEDER UNIT FOR THE BRAKE FLUID .
- Connect diagnostic system:
- Service functions
- Chassis
- Traction control systems
- Brake bleeding procedure
- Work through the instructions in the service function in sequence .
Repair instruction
Follow-up work