54 31 Convertible Top, Linkage And Actuation
54 31 TIGHTENING TORQUE OVERVIEW
| Base plate to window frame | ||
| Oval-head screw | Tightening torque | 8 Nm |
| Convertible roof brace to hood linkage | ||
| Oval-head screw | Tightening torque | 8 Nm |
| Convertible top latch to convertible top linkage | ||
| Nut | Tightening torque | 10 Nm |
| Convertible top on body | ||
| Hexagon screw M8x40 |
Tightening torque | 19 Nm |
| Convertible top on body | ||
| Hexagon screw M10x40 |
Tightening torque | 56 Nm |
| Convertible top on body | ||
| Torx bolt M10x25 |
Tightening torque | 56 Nm |
| Headlining support to hood linkage | ||
| Torx bolt | Tightening torque | 2.8 Nm |
| Seal carrier to hood linkage | ||
| Oval-head screw | Tightening torque | 5 Nm |