Fit the roof lining
Prerequisite
The front seats have been fully adjusted towards the bottom.
The front seat backrests have been fully adjusted towards the rear.
- Install the end support of the sun visors (1)
in the headlining and mount it with clamps (2)
.
- Check the clips (1)
on the headlining (2)
for damage and replace, if necessary.
- With a support person, install the headlining (1) through the cutout of the rear window and correctly position.
- Position and clip in the headlining (2)
at the clips (1)
.
- Clip in the clips (2) on the headlining (1) .
Follow-up work
- Refer to REPLACING THE SPACER .
- Refer to FOR REUSING: REMOVING THE ADHESIVE BEAD .
- Refer to INSTALLING THE REAR WINDOW .
- Refer to INSTALLING THE BRAKE LIGHT .
- Installing the trim of the auxiliary brake light.
Check
Check the clips (3) for damage and replace if necessary.
Check the locks (2) and guides (4) for damage.
Result
The lock or guide is damaged.
Replace the trim of the auxiliary brake light.
Trim of the 3rd Position the brake light (3) from below and clip in with the locks (2).
Clip in clips (1).
- Refer to INSTALL BOTH C-PILLAR TRIM PANELS .
- Refer to INSTALLING THE LEFT AND RIGHT B-PILLAR TRIM PANEL PARTIALLY .
- Refer to INSTALLING INTERIOR ROOF LIGHT .
- Refer to INSTALLING ALL GRAB HANDLES .
- Refer to INSTALL A-PILLAR TRIM PANEL, LEFT AND RIGHT .
- Refer to INSTALLING THE COVERS FOR THE INTERIOR MIRRORS .
- Refer to INSTALLING ROOF FUNCTION CENTER (FZD) .
- Refer to INSTALLING THE LEFT AND RIGHT HANDS-FREE MICROPHONE .
- Refer to INSTALLING FRONT VANITY MIRROR LIGHT .
- Refer to INSTALLING COUNTER SUPPORTS FOR THE SUN VISOR ON LEFT AND RIGHT .
- Refer to INSTALLING THE LEFT AND RIGHT SUN VISORS .
- Refer to INSTALLING THE TRIM PANEL FOR THE REAR LEFT AND RIGHT WATER CHANNEL .