Install the Soft-close motor

• Engage the soft-close motor (1)  at the holders (2)  in the direction of the arrow.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect and lock the connector (1)  .
• Clip the Bowden cable (2)  in at the holders on the tail panel.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Attach Bowden cable (1)  to tailgate lock (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL, LEFT .
• Refer to INSTALLING THE LUGGAGE COMPARTMENT WELL IN FRONT .
• Refer to INSTALLING LOADING EDGE TRIM .
• Refer to IF INSTALLED: INSTALLING THE EMERGENCY WHEEL .
• Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .