(Partially removing the coolant expansion tank of the high-temperature coolant circuit)
WARNING:
Hot surfaces
Risk of burning!
Risk of burning!
- Perform all work only on components that have cooled down
NOTE:
TECHNICAL INFORMATION
Do not kink or bend the coolant lines otherwise there is a risk of damage
Do not kink or bend the coolant lines otherwise there is a risk of damage
- Unlock plug connection (1) and disconnect
- Guide out cable (2) on coolant expansion tank (3) and set it aside
- Loosen clamp (4)
- Unlock plug connection (5) and disconnect
- Loosen clamp (1)
- Loosen screws (2)
- Release rubber mount (4) from expanding pin (5)
- Guide out expansion tank (3) and set it aside