Install the ornamental grille of the bumper panel on the side

Check 

• Check the detents (arrows) on the bumper cover for damage

Courtesy of BMW OF NORTH AMERICA, INC.

Result 

» Detents (1) are damaged

Measure 

• Replace the bumper cover

  Parts:  Bumper cover

• Position ornamental grille (1) and clip it into the detents (arrows)

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING FOG LIGHT SUPPORT .
• Refer to PARTIALLY INSTALLING THE BUMPER BRACKET .
• Refer to INSTALLING BUMPER COVER, FRONT .
• Refer to PARTIALLY INSTALLING THE TEMPERATURE SENSOR .
• Refer to PARTIALLY INSTALLING THE FRONT LEFT AND RIGHT WHEEL ARCH TRIM PANELS .
• Refer to INSTALLING THE CENTER ENGINE COMPARTMENT COVER .
• Refer to INSTALLING THE FRONT HOOD SEAL .