51 71 WHEEL ARCH TRIM PANEL, SHOCK TOWER BRACE, MISCELLANEOUS TRIM PANELS (M3 base, M3 Competition, M3 Competition M xDrive, M3 CS)
5171 TIGHTENING TORQUE OVERVIEW
| Firewall lower part on body | ||
| screw | Tightening torque | 2.6 Nm |
| Plastic nut | Tightening torque | 2.6 Nm |
| Connecting support on tunnel to body | ||
| Hexagon screw with flange | Tightening torque | 28 Nm |
| M10x25 screw | Tightening torque | 56 Nm |
| Angle of rotation | 90° | |
| Cover, steering unit | ||
| screw | Tightening torque | 3 Nm |
| Cowl upper part to bottom cowl | ||
| Tightening torque | 3 Nm | |
| Lower side cover at front | ||
| Hexagon screw for thermoplastic | Tightening torque | 2.6 Nm |
| Strut brace/front-end strut to holder | ||
| hexagon nut M8 | Tightening torque | 28 Nm |
| Tension strut on firewall | ||
| M10x35 screw Replace screws |
Tightening torque | 56 Nm |
| Angle of rotation | 90° | |
| Tension strut to shock tower | ||
| M10x70 screw Replace screws |
Tightening torque | 56 Nm |
| Angle of rotation | 90° | |
| Wheel arch cover | ||
| screw | Tightening torque | 3 Nm |
| Plastic nut | Tightening torque | 2.6 Nm |
| Wheel arch trim panel, front | ||
| Thermoplastic hexagon screw | Tightening torque | 2.6 Nm |