Lower the headlining on the left or right
NOTE:
RISK OF DAMAGE
Fold the headlining
Bending of the headlining can result in the need for the headlining to be replaced
Fold the headlining
Bending of the headlining can result in the need for the headlining to be replaced
- Carry out tasks with a second person to assist
- Support the headlining at the front and back
Preliminary work
- Refer to TRIM OF THE 3RD BRAKE LIGHT .
- Refer to REMOVING C-PILLAR TRIM PANEL .
- Refer to REMOVING INTERIOR ROOF LIGHT .
- Refer to INSTALLING THE HOLDER ON LEFT OR RIGHT .
- Refer to REMOVING THE B-PILLAR TRIM PANEL .
- Refer to REMOVING THE A-PILLAR TRIM PANEL .
- Refer to REMOVING SUN VISOR .
- Refer to REMOVING THE COUNTER SUPPORT FOR THE SUN VISOR .
- Refer to REMOVING THE FRONT VANITY MIRROR LIGHT .
- Refer to REMOVING THE HANDS-FREE MICROPHONE .
- Refer to REMOVING THE ROOF FUNCTION CENTER (FZD) .
- Refer to REMOVING THE COVERS FOR THE INTERIOR REARVIEW MIRROR .
- Unclip the headlining (1) from the clips (2) downward
- Release the clips (1) on the headlining (2)NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details
- Guide out the headlining at the respective edge protection
- Lower the headlining and place it onto the head restraints as shown