For reusing: Removing the adhesive bead
- Clean the windshield in the area of the adhesive bead (1)CONSUMABLE SPECIFICATION
Cleaning agent R2 500 ml 83190417324 - After cleaning, allow to air outTECHNICAL DATA SPECIFICATION
Air drying time after cleaning Window glass or painted panel without residual adhesive bead 5 min Body with adhesive bead 15 min - Remove adhesive bead (1) on the rear window just before the adhesion using standard tool (2)
Standard tool:
Pinchweld scraper set
Pinchweld scraper set
81 62 0 410 436
NOTE: TECHNICAL INFORMATION
Do not touch the adhesive bead after cutting or allow it to come into contact with cleaning agents - Prepare pinchweld scraper (2) as pictured
- Cut back adhesive bead (1) on rear window (3)TECHNICAL DATA SPECIFICATION
Residual height of the adhesive bead Residual height of the adhesive bead max. 1 mm