Removing the emblem at the rear
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components
Scratches, surface damage
Careless handling of tools and sharp-edged components
Scratches, surface damage
- Protect working area
- Handle tools and components carefully
- Mask the working area with plastic adhesive tape to avoid paint damage
- Heat the emblem (1) carefully with a hot air blower and release it from the adhesive strip with the special tool 0496 571 (00 9 327)TECHNICAL DATA SPECIFICATION
Heating using hot air blower Surface temperature 40°C... 50°C - Carefully lever off the emblem (1) from the guide pins (2) and remove
The emblem (1) must be replaced after disassembly
- Remove adhesive residue on the tailgate and clean the adhesive areaCONSUMABLE SPECIFICATION
Cleaning agent R2 500 ml 83190417324