Installing the guide for the rear center bumper cover

Tighten nuts (1)

TIGHTENING TORQUES SPECIFICATION

Rear center bumper cover to body
Nut and washer assembly with paint scrape groove	Tightening torque	5 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Clip in the clip (2)
Attach the vehicle wiring harness (1) in all the holders

Courtesy of BMW OF NORTH AMERICA, INC.
Position the vehicle wiring harness (3) on the right side of the guide for the rear center bumper cover
Clip in the connector housing (2)
Clip in clips (1)

Courtesy of BMW OF NORTH AMERICA, INC.
Position the vehicle wiring harness (2) on the left side of the guide for the rear center bumper cover
Clip in clips (1)

Courtesy of BMW OF NORTH AMERICA, INC.