When replacing the speaker holder: Remounting the mid-range speaker
- Loosen screws (1)
- Remove the mid-range speaker (2)
from the speaker holder (3)
 Courtesy of BMW OF NORTH AMERICA, INC.
|
- Install the mid-range speaker (2)
in the speaker holder (3)
- Tighten down screws (1)
TIGHTENING TORQUE SPECIFICATION
| Loudspeaker to dashboard/loudspeaker to door |
| screw |
Tightening torque |
1.8 Nm |
Courtesy of BMW OF NORTH AMERICA, INC.
|