(Install the holder of the positive battery cable)

CAUTION: Improper routing of the positive battery cable 
Risk of short circuits! 

• Route the positive battery cable without abrasions and do not trap

• Feed in bracket (2) of positive battery cable and position
• Tighten the screws (1)
  (TIGHTENING TORQUE SPECIFICATIONS)
  
  

  Holder, positive battery cable to cylinder head cover
  Self-tapping plastic screw 6 x 18	tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Secure cable (1) in clamps (2)

  Courtesy of BMW OF NORTH AMERICA, INC.

• Secure clamp (1) to holder (2)

  Courtesy of BMW OF NORTH AMERICA, INC.

• Secure the clamps (1) to holder (2)

Courtesy of BMW OF NORTH AMERICA, INC.