51 12 BUMPER, REAR (M3 base, M3 Competition, M3 Competition M xDrive, M3 CS)
5112 TIGHTENING TORQUE OVERVIEW
| Rear bumper cover guide on the side of the body | ||
| Nut and washer assembly with paint scrape groove | Tightening torque | 5 Nm |
| Rear bumper cover mount to support for rear bumper | ||
| Hexagon screw for thermoplastic | Tightening torque | 2.6 Nm |
| Rear bumper cover to rear side panel | ||
| Hexagon screw for thermoplastic | Tightening torque | 2.5 Nm |
| Rear center bumper cover to body | ||
| Nut and washer assembly with paint scrape groove | Tightening torque | 5 Nm |
| Rear center bumper cover to rear center guide | ||
| Hexagon screw for thermoplastic | Tightening torque | 2.5 Nm |
| Rear silencer on support | ||
| M8 hexagon nut | Tightening torque | 19 Nm |
| Support on impact plate | ||
| hexagon nut M12 | Tightening torque | 108 Nm |