Install the fuel filler pipe
- Position the fuel filler pipe (2) .
- Position snap fastener (1)
and lock.
- Install the nuts (1) and tighten.
TIGHTENING TORQUE SPECIFICATIONS
| Fuel filler pipe on upper body | ||
|---|---|---|
| Nut M6 Replace nut. |
tightening torque | 8 Nm |
- Position snap fastener (2) and lock.
- Mount front rubber hose of the fuel tank in arrow direction.
- Position hose clamp (1) and tighten.
TIGHTENING TORQUE SPECIFICATIONS
| Filling hose on fuel tank | ||
|---|---|---|
| Hose clamp Replace hose clamp. |
Tightening torque | 4 Nm |
Follow-up work
- Refer to REMOVING THE REAR WHEEL ARCH COVER .
- Refer to MOUNTING THE REAR RIGHT WHEEL .