Install the center console trim

• Connect all connectors.
• Turn the center console trim (1) to the side and feed it in over the gear selector switch (GWS) (2).
• Clip on the center console trim (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Remove the protective film (1) from the gear selector switch (GWS).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE CENTER CONSOLE .
• Refer to INSTALLING THE CENTER STACK TRIM .
• Refer to INSTALLING THE FOOTWELL TRIM PANEL ON THE RIGHT .
• Refer to INSTALLING THE TRIM PANEL FOR THE PEDAL ASSEMBLY .
• Refer to INSTALLING THE FRONT STORAGE COMPARTMENT .
• Refer to INSTALLING THE REAR STORAGE COMPARTMENT/DVD PLAYER .
• Refer to INSTALLING THE REAR CENTER CONSOLE TRIM .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .