Partially Installing The Fuel Filler Pipe

• Position the fuel filler pipe (1) on the coarse thread bolt (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the fuel filler pipe (2).
• Tighten nuts (1).

  TIGHTENING TORQUE SPECIFICATIONS 

  Fuel filler pipe to inner wheel arch section
  Plastic nut	3.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten nut (1).

  TIGHTENING TORQUE SPECIFICATIONS 

  Fuel filler pipe to outer wheel arch section
  Nut M6	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Mount the gas cap (1).
• Attach the retaining strap (2) in the direction of the arrow.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALL FLAP FOR FUEL FILLER NECK .
• Refer to INSTALLING THE REAR WHEEL ARCH COVER ON THE RIGHT .
• Refer to MOUNTING THE REAR RIGHT WHEEL .
• Refer to INSTALLING THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE RIGHT .
• Refer to INSTALLING LOADING EDGE TRIM .
• Refer to INSTALL THE COMPACT SPARE WHEEL STORAGE TRAY .
• Refer to INSTALLING THE STORAGE TRAY .
• Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .