Installing Trunk Lid

NOTE: RISK OF DAMAGE
Mechanical effects.
Paint damage.

Mask those working areas at risk with yellow plastic adhesive tape.
Remove and install heavy or bulky components with the aid of another person/other persons.

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten the screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Trunk lid to the hinge
Screw	tightening torque	19 Nm

Fasten harness (1) at the marked locations.

Courtesy of BMW OF NORTH AMERICA, INC.
Connect and install buzzer (2).
Clip in lugs (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Thread the cable (1) for rearview camera into the trunk lid.

Courtesy of BMW OF NORTH AMERICA, INC.