Remove The Outer Section Of The A-Pillar
NOTE:
RISK OF DAMAGE
Carbon Fiber Reinforced Plastic body parts damages.
Carbon Fiber Reinforced Plastic body parts may not be damaged under any circumstance.
Carbon Fiber Reinforced Plastic body parts damages.
Carbon Fiber Reinforced Plastic body parts may not be damaged under any circumstance.
- Carry out separation cut only on outer component. Do not tap the underlying component.
- While removing the adhesive, do not tap the underlying component.
- (1) Mark severance cut () as pictured and cut. Thereby disconnect only the outer panel.
- Release welded connections in areas (2).NOTE: TECHNICAL INFORMATION
For additional information see: 41 00... Releasing bonded connections - Open spot-welded adhesive joints in areas (3).
- Release bonded connection in area (4).
- Release and remove the A-pillar outer part from the cavity sealing (5).