Remove both actuators (engine removed)

NOTE: The illustration shows the rear of the engine.

• Unlock and disconnect both connectors (1).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: The illustration shows the rear of the engine.

• Position special tool 2 360 895  correctly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Twist the actuator (1) of the intake side with the special tool 2 360 895  by about 50° in the direction of the arrow and remove it.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Twist the actuator (1) of the exhaust side with the special tool 2 360 895  by about 50° in the direction of the arrow and remove it.

Courtesy of BMW OF NORTH AMERICA, INC.