Removing and installing/replacing head-up display (330i xDrive Wagon, 328d xDrive Wagon, 330i GT xDrive, 340i GT xDrive)

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Attention !

Read and comply with NOTES on protection against electrostatic damage (ESD protection).

Attention !

Comply with NOTES on handling optical fibers.

Risk of damage!

Do not scratch glass pane of head-up display.

Necessary preliminary tasks:

Remove instrument PANEL TRIM .

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Similar to graphic.

Remove seal (1) from head-up display (2).

Loosen screws (3).

Tightening torque 62 30 1AZ .

Carefully feed out head-up display (2) in upward direction.

Unlock plug connection (1) on underside of head-up display (2) and disconnect.

Remove head-up display (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Clean the glass pane of the Head-Up Display.

Adjust HEAD-UP DISPLAY .

Replacement:

NOTE: When replacing the Head-Up Display in vehicles with production date up to 03/2017 it is necessary to PROGRAM the instrument cluster.