63 12... US version: Check/set horizon blocking after adjusting the headlight (330i xDrive Wagon, 328d xDrive Wagon, 330i GT xDrive, 340i GT xDrive)

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Required Special Tools:

2 467 369

NOTE: Before installing the new headlight, ensure that the adjustment screw for the horizontal adjustment of the headlight is protected with a plug from being manipulated.

Courtesy of BMW OF NORTH AMERICA, INC.

Special tool 2 467 369 has a freewheel for fitting the horizontal lock without damaging it or applying any torque (special tool availability temporarily delayed until Q1 2019)

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully insert the plug (1) for blocking the horizontal adjustment on the special tool 2 467 369 without damaging it.

Courtesy of BMW OF NORTH AMERICA, INC.

Push the plug (1) with the special tool 2 467 369 into the adjustment screw for horizontal adjustment (2) without damaging it (schematic illustration).