LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2022 >> 540i >> Repair and Diagnosis >> External Pages >> Different car >> Section 213 (Engine - Repair (F31 & F34) (1 Of 5)) >> 11 12 Cylinder Head With Lid >> Remove and install/replace design cover (B48B) (330i xDrive Wagon, 330i GT xDrive)

Remove and install/replace design cover (B48B) (330i xDrive Wagon, 330i GT xDrive)

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Removal: 

Unclip design cover (1) in upward direction.

G12700746Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Ensure correct installation of the rubber plugs (1).

G12700747Courtesy of BMW OF NORTH AMERICA, INC.

Position design cover (1) and clip in the marked areas.

G12700746Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals