Removing and installing/replacing switch for (rear) left or right seat heating (330i xDrive Wagon, 328d xDrive Wagon, 330i GT xDrive, 340i GT xDrive)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove REAR CENTER CONSOLE TRIM .
Use a suitable tool to release latch mechanisms (1) on left/right switch (2).
Remove switch (2) from cover (3) in direction of arrow.
Installation note:
Latch mechanisms (1) on cover (3) must not be missing or damaged.
Make sure switch (2) is correctly fitted in cover (3).