LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2022 >> 540i >> Repair and Diagnosis >> External Pages >> Different car >> Section 202 (General Electrical System - Repair (F31 & F34)) >> 61 31 Switch, Sensor >> Removing and installing/replacing light control unit (330i xDrive Wagon, 328d xDrive Wagon, 330i GT xDrive, 340i GT xDrive)

Removing and installing/replacing light control unit (330i xDrive Wagon, 328d xDrive Wagon, 330i GT xDrive, 340i GT xDrive)

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.

Necessary preliminary tasks: 

G14171596Courtesy of BMW OF NORTH AMERICA, INC.
NOTE: Work shown on the F30 by way of example, deviations in detail are possible in other models.

Reach behind the opening.

Unlock retaining clips (1) by pushing down.

Fold cover with light control unit (2) out of instrument panel.

Unfasten plug connection (1) and disconnect.

Remove cover with light control unit (2).

G14171597Courtesy of BMW OF NORTH AMERICA, INC.
G14171598Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Remove light control unit (1) from latch mechanism (2) and remove from trim (5).

Installation note: 

Ensure the light control unit (1) is latched correctly in the trim (5).

Guides (3) and clamps (4) on cover (5) must not be damaged or missing.