Removing and installing/replacing left or right rear window frame trim panel (330i xDrive Wagon, 328d xDrive Wagon)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 9 325
Necessary preliminary work:
- Remove rear window frame top TRIM PANEL
NOTE:
The operation is described on the left side; proceed in the same way for the right side.
When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.
Release trim panel (1) at clips (2) with special tool 00 9 325.
Installation note:
Guide (1) and clips (2) of trim panel (3) must not be damaged or missing.
If necessary, replace clips (2).
Replacement
Modify clamps (2).