Installing the power windows
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
- Guide the power window regulator (4) in and tighten the nuts (3).TIGHTENING TORQUE SPECIFICATIONS
Power window on door 9.5 Nm - Secure the Bowden cable in the area (2) on cable clip.
- Connect connector (1).
- Remove adhesive tape (2) from the door window glass (1).
- Press door window glass (1) down into latch mechanism on the sliding block (2).
Follow-up work
- Install front door SOUND INSULATION
- Install the left or right front DOOR TRIM PANEL
- Install switch trim on the front left or right front door TRIM PANEL
- Fix front left or right door HANDLE COVER
- Functional check of the POWER WINDOW