Removing and installing or replacing trim strip on roof gutter at left or right (330i GT xDrive, 340i GT xDrive)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Make sure that body is not damaged.
Open door at front and rear.
Release screw (1) in area of C-pillar.
Starting from the front, use special tool 00 9 325 to release trim strip (1) from clips (2).
Installation note:
To prevent leaks and noises, check all clips (2) for visible damage.
Replace faulty clips (2)
Align clips (2) on body and fit trim strip (1)
IMPORTANT:
- Carry trim strip by its middle section only (risk of damage)
- Perform installation work with a second person helping
- Prepositioning of trim strip
- Ensure gutter strip runs parallel to side frame (risk of breakage)