Removing the bottom automatic air flap control
Preliminary work
- Refer to REMOVING SEAL FOR FRONT HOOD .
- Refer to REMOVING THE COVER FOR THE CENTER ENGINE COMPARTMENT .
- Refer to REMOVING CENTER RADIATOR ORNAMENTAL GRILLE .
- Refer to PARTIALLY RELEASING THE FRONT LEFT AND RIGHT WHEEL ARCH TRIM PANELS .
- Refer to PARTIALLY REMOVING TEMPERATURE SENSOR .
- Refer to REMOVING FRONT BUMPER COVER .
- Refer to IF INSTALLED: REMOVING FRONT RADAR SENSOR (FRS) WITH BRACKET .
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- If necessary, release the wiring harness from the holder (1) .
- Loosen screws (2) .
- Guide out the bottom air flap control with the guides (3) in a forwards direction.
- Unlock associated plug connection and disconnect.