Installing rear brake pads

• Install the brake pad (1)  in arrow direction.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Remove the special tool (cable tie) 2 413 317 .
• Mount brake caliper (3)  .
• Replace screws (1)  .

  Parts:  Screws

• Tighten the screws (1)  , if applicable, hold against the hexagon head (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE REAR BRAKE PAD WEAR SENSOR .
• Refer to INSTALLING REAR WHEEL ON THE LEFT AND RIGHT .
• Refer to START-UP OR BEDDING IN BREAK-IN OF NEW BRAKE PADS AND ROTORS (REAR BRAKE) .