Installing the rear diffuser
- Version 1:
- Install the diffuser and tighten nuts (1) .
TIGHTENING TORQUE SPECIFICATION
| Diffuser/undershield | ||
|---|---|---|
| Nuts and screws | Tightening torque | 3 Nm |
- Version 2:
- Thread in the rear diffuser (2) and position.
- Tighten screws (arrows).
TIGHTENING TORQUE SPECIFICATION
| Diffuser/undershield | ||
|---|---|---|
| Nuts and screws | Tightening torque | 3 Nm |
- Tighten nuts (1) .
TIGHTENING TORQUE SPECIFICATION
| Diffuser/undershield | ||
|---|---|---|
| Nuts and screws | Tightening torque | 3 Nm |