Installing the cover of the towing eye
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Guide in tether.
- Position the cover of the towing eye (1) and clip in with the detents (2) .
Follow-up work
- Refer to INSTALLING THE REAR BUMPER COVER .
- Refer to INSTALLING THE TAIL LIGHT ON THE LEFT AND RIGHT SIDE PANELS .
- Refer to INSTALLING THE TRIM IN THE WATER CHANNEL ON THE LEFT AND RIGHT .
- Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL LEFT AND RIGHT PARTIALLY .
- Refer to INSTALLING THE LUGGAGE COMPARTMENT WELL IN FRONT .
- Refer to INSTALLING LOADING EDGE TRIM .
- Refer to IF INSTALLED: INSTALLING THE EMERGENCY WHEEL .
- Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .