Removing upper cross connection

Preliminary work 

• Refer to REMOVING SEAL FOR FRONT HOOD .
• Refer to REMOVING THE COVER FOR THE CENTER ENGINE COMPARTMENT .

• Release the housing (1)  for the coupling of Bowden cable from the body.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Detach Bowden cable (1)  on the upper cross connection.
• Loosen screws (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1)  and (2)  .
• Remove the upper cross connection upwards with the holders (3)  .

Courtesy of BMW OF NORTH AMERICA, INC.