Remove the guide for the rear bumper panel on the side

Preliminary work 

• Refer to IF INSTALLED: REMOVING THE LANE CHANGE WARNING SENSOR .
• Refer to IF INSTALLED: REMOVING EMERGENCY HORN (ADDITIONAL WORK FOR ANTI-THEFT ALARM SYSTEM) .

• Loosen nuts (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Open the lock (1)  .
• Unclip the clips (2)  of the vehicle wiring harness and the place the wiring harness aside.
• Remove the guide (3)  for the rear bumper cover on the side.

Courtesy of BMW OF NORTH AMERICA, INC.