Installing left and right brake ventilation duct

Install the brake ventilation duct 

• Insert and position the brake ventilation duct (2).
• Fasten expanding rivet (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Secure expanding rivet (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: To provide a better overview: Schematic diagram without front wheel.
• Tighten down screws (1).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Brake ventilation duct on front wheel arch cover front section
  Hexagon screw for thermoplastic material	Tightening torque	2.6 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the vertical connection (2) and clip it into the detents (3).
• Tighten down screws (1).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Vertical connection to deformation element
  Flat-head screw M6x20	Tightening torque	11.8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.