Lower the headlining on the left or right (with sliding/tilting sunroof)
NOTE:
RISK OF DAMAGE
Fold the headlining .
Bending of the headlining can result in the need for the headlining to be replaced .
Fold the headlining .
Bending of the headlining can result in the need for the headlining to be replaced .
- Carry out tasks with a second person to assist.
- Support the headlining at the front and back.
Preliminary work
- Removing the trim of the auxiliary brake light.
Loosen the clips (1).
Release the locks (2) and remove the trim of the 3rd brake light (3).
- Refer to REMOVING C-PILLAR TRIM PANEL .
- Refer to REMOVING INTERIOR ROOF LIGHT .
- Refer to INSTALLING THE HOLDER ON LEFT OR RIGHT .
- Refer to REMOVING THE B-PILLAR TRIM PANEL .
- Refer to REMOVING THE A-PILLAR TRIM PANEL .
- Refer to REMOVING SUN VISOR .
- Refer to REMOVING THE COUNTER SUPPORT FOR THE SUN VISOR .
- Refer to REMOVING THE FRONT VANITY MIRROR LIGHT .
- Refer to REMOVING THE HANDS-FREE MICROPHONE .
- Refer to REMOVING THE ROOF FUNCTION CENTER (FZD) .
- Refer to REMOVING THE COVERS FOR THE INTERIOR REARVIEW MIRROR .
NOTE:
RISK OF DAMAGE
Fold the headlining .
Bending of the headlining can result in the need for the headlining to be replaced .
Fold the headlining .
Bending of the headlining can result in the need for the headlining to be replaced .
- Carry out tasks with a second person to assist.
- Support the headlining at the front and back.
- Unclip the headlining (1)
at the clips (2)
downwards.
- Loosen screw (1) .
- Unclip the headlining at the clips (2)
downwards.
- Unclip the headlining (1)
from the sliding/tilting sunroof case and the clamps (2)
in the area of the dotted line.NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.
- Guide out the headlining at the respective edge protection.
- Lower the headlining and place it onto the head restraints as shown.