Install the exhaust bracket
- Install the exhaust bracket (2).
- Tighten down screws (1).TIGHTENING TORQUES SPECIFICATION
Transmission to engine M8 Tightening torque 19 Nm M12 Tightening torque 66 Nm - Version A:
Tighten down screw (1).
TIGHTENING TORQUES SPECIFICATIONCatalytic converter to holder M8
Replace screw.Tightening torque 19 Nm - Tighten nut (2).
- Version B:
Tighten nut (1).
- Install the exhaust bracket (2).
- Tighten down screws (1).TIGHTENING TORQUES SPECIFICATION
Transmission to engine M8 Tightening torque 19 Nm M12 Tightening torque 66 Nm - Version A:
Tighten down screw (1).
TIGHTENING TORQUES SPECIFICATIONCatalytic converter to holder M8
Replace screw.Tightening torque 19 Nm - Tighten nut (2).
- Version B:
Tighten nut (1).