If installed: Install underbody protection for the steering

Precondition

Front underbody protection is removed.

• Position the underbody protection (1).
• Tighten down screws (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Underbody protection steering on front subframe
  Multi-purpose bolt M10	Tightening torque	56 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

  TIGHTENING TORQUES SPECIFICATION
  
  

  Underbody protection steering on front subframe
  Hexagon screw M6	Tightening torque	8 Nm